| Ballast | Quantity and type as specified – see ordering information. All ballasts UL listed class P. Optional Removable Gear Tray (RGT) with quick disconnect. |
|---|
| Door | One-piece die-formed prime grade material as specified – see ordering information. |
|---|
| Electrical | (Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 330μA maximum source current. Single-Mode ICT provides a single, white disinfection operational mode. Dual-Mode ICT provides two operational modes based on room occupancy. White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection. Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy. The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system. Luminaire dimming is overridden in this operational state. Refer to the Kenall Dual-Mode ICT Control Application Guide for further description. |
|---|
| Fasteners | Hardened security screws as specified – see ordering information. Fully recessed. |
|---|
| Housing | One-piece die-formed prime grade material as specified – see Ordering Information. Corners continuously seam welded and smooth with no post grinding (TIG). Staked and welded external piano hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for 2' Internal Hinge (IH) and Full Length Internal Hinge (IHF). TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Lamps | Quantity and type as specified – see ordering information. Lamps supplied by others. |
|---|
| Lens | As specified – maximum overall thickness 0.375" – see Ordering Information. High efficiency diffused DR acrylic inner lens. Lens retention by vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). |
|---|
| Listings | Luminaire is certified to UL Standards by either Underwriters Laboratory or Intertek Testing Laboratory for Damp Location. See Options for Wet Location rating. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. |
|---|
| Patent | US Patent No. 7,431,473. |
|---|
| Photometrics | For photometric information, go to www.kenall.com. |
|---|
| Warranty | Limited five (5) year warranty. |
|---|