| Electrical | (Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 330μA maximum source current. Single-Mode ICT provides a single, white disinfection operational mode. Dual-Mode ICT provides two operational modes based on room occupancy. White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection. Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy. The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system. Luminaire dimming is overridden in this operational state. Refer to the Kenall Dual-Mode ICT Control Application Guide for further description. |
|---|
| Housing | 20-gauge CRS. One-piece seam welded construction. Housing flange in 18-gauge CRS, with mitered and welded corners, spot-welded to housing. Mitered and welded corners. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. |
|---|
| Installation | Grid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit. |
|---|
| Listings | UL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. |
|---|
| Patent | U.S. Patent No. 8,511,850. |
|---|
| Reflector/Lens Assembly | Fully gasketed, sealed luminous shield diffuser constructed of impact-resistant frost DR acrylic. Reflector constructed in one-piece, formed 20-gauge CRS. Low-gloss white TGIC polyester powder coat with 5-stage pre-treatment. Salt spray test 1,000 hours. Tool-less lamp access. |
|---|
| Warranty | Limited five (5) year warranty on LED lamps. |
|---|