Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

ME14-ICT

MedMaster Envela Recessed Luminaires

ME14-ICT Main Image
ME14-ICT Main ImageEnvela MaintenanceEnvela Perf Lens
Model #: ME14-ICT
Features:
  • Provides environmental disinfection and effective, efficient lighting performance via visible LED light
  • Dual-Mode Indigo-Clean Technology is independently tested to kill 94% of SARS CoV-2 and Influenza-A***, in addition to MRSA
  • Single-Mode Indigo-Clean Technology is independently tested to kill harmful bacteria, such as Staph*, including MRSA**
  • Cleanable to NSF2 and sealed to IP64 construction standards 
Application(s):Cafeterias
Restrooms
Showers
Nursing Stations
Patient Rooms
Foyers and Lobbies
Corridors
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):12"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array.  Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance.  Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF).  Minimum 85% driver efficiency.  Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities.  330μA maximum source current.  Single-Mode ICT provides a single, white disinfection operational mode.  Dual-Mode ICT provides two operational modes based on room occupancy.  White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection.  Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy.  The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system.  Luminaire dimming is overridden in this operational state.  Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
Housing20-gauge CRS. One-piece seam welded construction. Housing flange in 18-gauge CRS, with mitered and welded corners, spot-welded to housing. Mitered and welded corners. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationGrid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved.
PatentU.S. Patent No. 8,511,850.
Reflector/Lens AssemblyFully gasketed, sealed luminous shield diffuser constructed of impact-resistant frost DR acrylic.  Reflector constructed in one-piece, formed 20-gauge CRS.  Low-gloss white TGIC polyester powder coat with 5-stage pre-treatment.  Salt spray test 1,000 hours.  Tool-less lamp access.
WarrantyLimited five (5) year warranty on LED lamps.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top