Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

HADL6

Millenium Downlights (Flush Lens)

HADL6 Main Image
HADL6 Main Image
Model #: HADL6
Features:
  • 6" sealed, recessed downlight with flush lens trim
  • Peace of Mind Guarantee® against breakage
  • 630 - 4,600 delivered lumens with multiple distribution, reflector finish and lens options
  • 1% Dimming via 0-10V or DALI-2 control
  • NSF2 and IP65 ingress protection rating
  • Ligature resistant construction
Application(s):Parks and Recreation
Locker Rooms
Multifamily Housing
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Natatoriums
Canopy
Lens Type(s):.250" Clear Polycarbonate
.125" Clear Polycarbonate
Lamp Type(s):LED
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical
LED source available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA maximum source current. Optional eldoLED ECOdrive DALI-2 (DT6) / LEDcode2 driver with 1-100% range.
HeatsinkDie-cast aluminum with external radial fins for natural convection.
InstallationSuitable for ambient temperature temperatures of -30oC to +40oC, unless otherwise stated.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP65 rating per IEC60598. Optional CCEA compliance. Ligature resistant construction.
OpticalClear tempered glass upper lens.  1/8" or 1/4" clear polycarbonate flush lens at ceiling trim.  Continuous seal between lens and trim ring.  Available with various reflector distribution patterns and finishes.  See Ordering Information for available options.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.  For photometric information, go to www.kenall.com.
Rough-In Frame18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section.
Trim/Housing SectionIP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Flush lens trim secured with four (4) Torx® tamper-resistant, captive fasteners. See Trim Ordering Information for available options.
WarrantyPeace of Mind Guarantee® against breakage. Five (5) year warranty against mechanical defects.  Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top