•  

CSEDOIC22

Indigo-Clean

CSEDOIC22_HS01.png
CSEDOIC22_HS01.png
Model #: CSEDOIC22
Features:
  • Two operational modes: White Disinfection Mode & Indigo Disinfection Mode
  • USP 797 and 800 compliant
  • High performance LED arrays provide uniform lens appearance
  • Diffused high-efficiency lens for reduced glare
  • Symmetric optical distribution
  • Universal housing accomodates either flange (drywall) or grid ceiling applications
  • One-piece sealed housing; smooth exterior doorframe and lens for infection control and simplified cleaning protocols
Application(s):Pharmaceutical
Healthcare Pharmacies
Size(s):24"×24"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4. Thumb screws used for FN option.
ElectricalServiceable mid-power white LED array and high-power 405 nm indigo LED array. Available 3700K and 4300K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI available. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<20% THD, >0.88 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities in White Disinfection Mode. 1mA maximum source current. Two operational modes: White Disinfection Mode is a white LED array for ambient lighting plus simultaneous low-power 405nm indigo array for low-level continuous environmental disinfection. Indigo Disinfection Mode is a high power 405nm Indigo LED array for continuous environmental disinfection. Operational mode determined via internal low-voltage device based upon input provided by external IC150 room control system. EMC meets or exceeds MIL STD 461G conducted requirements.
Housing20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heatsink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. Gloss white TGIC polyester powder-coat finish with 5-stage pre-treatment. Antimicrobial finish on all exposed painted surfaces of installed luminaire.
InstallationNon-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into flange (drywall) or grid ceiling applications.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for IC and Wet Location installations. ETL certified IP66 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Conducted emissions compliant with MIL-STD-461G limits. CCEA Approved.
OpticalSymmetric optic includes diffused, impact-resistant acrylic lens.
PatentIndigo-Clean products and technology covered by U.S. Patent No. US 9,039,966 and US 8,398,264. Product may also be covered by patents found at
www.kenall.com/patents. Other patents pending.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please contact Indigo-Clean@Kenall.com.
WarrantyLimited five (5) year Kenall LED warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Photometry (IES)

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top