Doorframe | 20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (10) for 1x4, (8) for 2×2, (12) for 2×4. |
---|
Electrical | Serviceable mid-power white LED array and high-power 405 nm indigo LED array. Available 3700K and 4300K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI available. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<20% THD, >0.88 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities in White Disinfection Mode. 330 µA maximum source current to dimming line. Two operational modes: White Disinfection Mode is a white LED array for ambient lighting plus simultaneous low-power 405nm indigo array for low-level continuous environmental disinfection. Indigo Disinfection Mode is a high power 405nm Indigo LED array for continuous environmental disinfection. Operational mode determined via internal low-voltage device based upon input provided by external IC150 room control system. |
---|
Housing | Standard 24-gauge cold rolled steel with dust-tight, sealed construction. Alternate material options available. Integral LED heat sink. Rigid housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours. Internal high reflectance coating. Flange finish matches housing, regardless of doorframe finish. |
---|
Installation | IC-rated for recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into flange (drywall) or grid ceiling applications. |
---|
Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for type IC (insulated ceilings) and Wet Location installations. ETL certified IP66 per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. CCEA Approved. EPA Est. No. 99283-WI-1. |
---|
Optical | Injection-molded, high refraction optics provided for each occupied-mode. Proprietary KORE Technology™ (Kenall Optical Radiance Engine) delivers improved visual performance and uniform diffuser luminance (<1.5:1 max/min ratio across full lens area). Impact-resistant diffused acrylic outer lens. |
---|
Patent | Indigo-Clean products and technology covered by U.S. Patent No. US 9,039,966 and US 8,398,264. Product may also be covered by patents found at www.kenall.com/patents. Other patents pending. |
---|
Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please contact Indigo-Clean@Kenall.com. |
---|
Warranty | Limited five (5) year Kenall LED warranty. |
---|