Baseplate | Prime grade material as specified – see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion. |
---|
Electrical |
Available 3000K, 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constantcurrent driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 330 μA max. source current.
|
---|
Fasteners | Hardened security screws as specified – see ordering information. Fully recessed. |
---|
Finish | TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
---|
Hinge | 2' completely concealed internal drop slot piano hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for Full Length Internal Hinge (IHF). |
---|
Housing | One-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contraband concealment. |
---|
Installation | Fixture not suitable for Surface Conduit or Continuous Row Mounting. |
---|
Lens | As specified – maximum thickness .625" – see ordering information. Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot be provided.` |
---|
Lens Retention | Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). |
---|
Listings | UL and CUL listed for damp locations. See ordering information for wet location applications. |
---|
Luminous Seal | Polyurethane foam prevents light leaks from luminaire base. |
---|
Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. |
---|