MedMaster for Patient Rooms
| Model #: | MPCADE |
|---|---|
| Features: |
|
| Application(s): | Patient Rooms Isolation Areas |
| Lamp Type(s): | LED Linear Fluorescent |
| Size(s): | 2'x2' 2'x4' |
| Listings: |
Technical Specifications
| Doorframe | Heavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips-head stainless steel fasteners secure door to housing – 8 with IB-AC and 2 with IB-HD. Extruded closed cell gasket seals doorframe to housing. |
|---|---|
| Electrical | LED: Available 3000K, 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. LF:Fluorescent electronic ballasts, high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others. |
| Housing | Housing: FLANGE AND GRID: 20-gauge CRS seam welded one-piece construction. SURFACE: 18-gauge CRS one-piece seam welded construction. White TGIC polyester powder coast – 5-stage pre-treatment. Salt spray test 1,000 hours. Reflectance 92%. (See options for Antimicrobial Finish). Housing Flanges –18-gauge CRS. |
| Installation | SURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets. |
| Lamp Shielding | Exam compartment shielded by frosted linear prismatic high impact acrylic. Ambient compartment shielded by 100% internal fluted high impact acrylic. |
| Lens | .125" clear high impact acrylic. Sealed to extruded aluminum frame with a vinyl gasket. |
| Listings | UL and CUL Listed for Wet Location and UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only). CCEA approved for grid or flange mount. |
| Patent | U.S. Patent No. D562,767 on Low Voltage Controller (LVC) option. |
| Warranty | Limited five (5) year warranty. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
Downloads
Product Documentation
Installation Files
Photometry (IES)
REVIT Files
Additional Resources
| Model #: | MPCADE-BIOS |
|---|---|
| Features: |
|
| Application(s): | Patient Rooms Isolation Areas |
| Lamp Type(s): | LED |
| Size(s): | 2'x4' |
| Listings: |
Technical Specifications
| Doorframe | Heavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips-head stainless steel fasteners secure door to housing – 8 with IB-AC and 2 with IB-HD. Extruded closed cell gasket seals doorframe to housing. |
|---|---|
| Driver/Controls |
120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). AMBIENT: Biological Static: Serviceable, constant-current single channel driver with single analog (0-10V) control input for intensity. 1-100% range with dim to dark capabilities and a linear dimming curve. Biological Dynamic: Serviceable constant-current driver with the BIOS Dynamic Bio-Dimming™ module keeps light output constant while reducing melanopic lux. Single analog (0-10V) control input. 1-100% dimming range with dim-to-dark capabilities and a linear dimming curve. Dimming from 100-75% reduces CCT by 500K, dimming below 75% reduces light level. Biological Tunable: Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. EXAM: Serviceable constantcurrent programmable driver. Dimming protocol matches BIOS Biological circuit selection: 0-10V dimming with 1-100% range and dim-to-dark capabilities or DALI with 1-100% range and dim-to-dark capability.
|
| Housing | Flange and Grid – 20-gauge CRS. Surface – 18-gauge CRS. One-piece seam welded construction. White TGIC polyester powder coast – 5-stage pre-treatment. Salt spray test 1,000 hours. Reflectance 92%. (See options for Antimicrobial Finish). Housing Flanges –18-gauge CRS. |
| Installation | SURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets. |
| Lamp Shielding | Exam compartment shielded by frosted linear prismatic high impact acrylic. Ambient compartment shielded by 100% internal fluted high impact acrylic. |
| LED Module |
AMBIENT: Serviceable static, dynamic or tunable mid-power Gen 2 BIOS Biological LED modules. Biological Static, Biological Dynamic, and Biological Tunable LED source with blue spectrum peak at 490nm and higher melanopic ratio. CRI 80+ with R9 > 90. Dynamic features 500K downward CCT shift when dimmed for evening applications requiring lower melanopic ratio. Tunable features 2700K CCT for evening applications. Refer to table for specific melanopic values. EXAM: Serviceable Biological Static LED source with blue spectrum peak at 490nm and higher melanopic ratio. 3500K or 4000K selection options. CRI 80+ with R9 > 90.
|
| Listings | UL and CUL Listed for Wet Location and UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only). CCEA approved for grid or flange mount. |
| Lumen Data | MPCADE24 Lumen Data |
| Optics | Outer lens constructed of 0.125” clear impact-resistant acrylic and sealed to doorframe with vinyl gasketing. Inner exam and ambient functions are constructed with high-efficiency frost acrylic. |
| Warranty | Limited five (5) year warranty. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
Downloads
Product Documentation
Installation Files
Photometry (IES)
Additional Resources
| Model #: | MPCADE-TW |
|---|---|
| Features: |
|
| Application(s): | Patient Rooms Isolation Areas |
| Lamp Type(s): | LED |
| Size(s): | 2'x4' |
| Listings: |
Technical Specifications
| Doorframe | Heavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips-head stainless steel fasteners secure door to housing – 8 with IB-AC and 2 with IB-HD. Extruded closed cell gasket seals doorframe to housing. |
|---|---|
| Driver/Controls | 120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. AMBIENT: Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details. . EXAM: Serviceable constant-current programmable driver. Dimming protocol matches tunable white circuit selection: 0-10V dimming with 1-100% range and dim-to-dark capabilities or DALI with 1-100% range and dim-to-dark capability. |
| Housing | Flange and Grid – 20-gauge CRS. Surface – 18-gauge CRS. One-piece seam welded construction. White TGIC polyester powder coast – 5-stage pre-treatment. Salt spray test 1,000 hours. Reflectance 92%. (See options for Antimicrobial Finish). Housing Flanges –18-gauge CRS. |
| Installation | SURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets. |
| Lamp Shielding | Exam compartment shielded by frosted linear prismatic high impact acrylic. Ambient compartment shielded by 100% internal fluted high impact acrylic. |
| LED Module | AMBIENT: Serviceable tunable-white, mid-power LED array provides 2700K through 6500K CCT range with a two-point path. 3-step MacAdam variation allowance on each CCT. Minimum 82 CRI standard (R9 >20) with optional minimum 92 CRI (R9 >50). EXAM: Serviceable mid-power LED array. See Ordering Information for CCT options. 3-step MacAdam variation allowance. 82 CRI minimum. |
| Lens | .125" clear high impact acrylic. Sealed to extruded aluminum frame with a vinyl gasket. |
| Listings | UL and CUL Listed for Wet Location and UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only). CCEA approved for grid or flange mount. |
| Optics | Outer lens constructed of 0.125” clear impact-resistant acrylic and sealed to doorframe with vinyl gasketing. Inner exam and ambient functions are constructed with high-efficiency frost acrylic. |
| Patent | U.S. Patent No. D562,767 on Low Voltage Controller (LVC) option. |
| Warranty | Limited five (5) year warranty. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.