- Home>
- Products>
- Product Selector / All Products>
- Product Detail>
- MedMaster SoftStep Contour Steplights
MedMaster SoftStep Contour Steplights


| Model #: | MCSL |
|---|---|
| Features: |
|
| Application(s): | Multifamily Housing Nursing Stations Dorm Rooms Patient Rooms Foyers and Lobbies Isolation Areas Corridors Burn Units |
| Lamp Type(s): | LED |
| Listings: |
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.
Technical Specifications
| Electrical |
120-277VAC, 50/60 Hz Maximum input power 3.8 watts. LED light source available in warm white (ANSI 2700K), neutral white (ANSI 4000K) or amber (600nm). Lumen output adjustable to 100%, 33%, and 6% at time of maintenance or installation. Factory pre-set at 33% dimming level (1.5 watts).
|
|---|---|
| Housing | Die-cast aluminum. TGIC polyester powder coat finish – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial finish on all exposed components of installed luminaire. See Ordering Information for finish options. |
| Installation | Standard installation requires the back plate to be mounted to a NEMA single-gang junction box (supplied by others). See junction box accessories below for adjustable thru-wall and single-sided applications. See SoftStep Contour Junction Box Accessories Tech Sheet for application details. Recommended mounting height is 14" from floor to center of luminaire. |
| Lens | UV-stabilized, high-impact resistant injection molded pearlescent polycarbonate. |
| Listings | UL and CUL Listed for Wet Location. NSF2 Splash/Non-Food Zone. ADA Compliant. Optional UL certified IP64 per IEC 60598. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux. Ligature resistant construction. |
| Mounting Plate | Die formed corrosion resistant steel. |
| Patent | U.S. Patent D639984. |
| Reflector | Die cast aluminum reflector with integral heat sink. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
