•  

MRS4

MedSlot

MRS4_HS01.png
MRS4_HS01.png
Model #: MRS4
Features:
  • 4" recessed linear slot luminaire in multiple lengths
  • Single-function luminaire provides ambient lighting within the patient room
  • Symmetric and 15o asymmetric optical distribution options
  • No visible room-side fasteners for clean aesthetic
  • High-output, high-CRI LED lamp sources
Application(s):Patient Rooms
Lamp Type(s):LED
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Driver120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; maximum 330 µA maximum source current. Optional eldoLED ECOdrive DALI drivers with 1-100% range and Lutron EcoSystem dimming drivers with 1-100% range and Soft-On, Fade-to-Black.
HousingExtruded 6063-T5 aluminum construction with gasketed aluminum endcaps. Low-gloss anti-microbial white TGIC polyester powder-coat finish with five-stage pre-treatment.
InstallationSuitable for Type-IC recessed ceiling installation into 9/16" and 15/16" lay-in and tegular grid ceilings, flanged drywall ceilings and trimless mud-in installations with 5/8" drywall. See Ordering Information for selection. Sealed hub provided for 1/2" threaded conduit supply. Suitable for 0°C - 40°C ambient temperature environments.
LED ModuleServiceable mid-power LED array. Minimum 82 CRI standard (R9>20). See Ordering Information for available color temperature options.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Type-IC and Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance.
OpticsSymmetric (Lambertian) or 15° asymmetric distribution option. Snap-in, one-piece extruded frost DR acrylic diffuser.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For detailed photometric information, please visit www.kenall.com.
WarrantyLimited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top