|Doorframe||One-piece die-formed prime grade material as specified – see Ordering Information. Doorframe supported to housing with two aircraft cables. Corners continuously seam welded and smooth with no post grinding (TIG).|
|Driver||120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. |
|Fasteners||Torx® head with center pin hardened security screws. Fully recessed.|
|Finish||GIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Optional antimicrobial finish.|
|Gasket||Closed cell Neoprene/EPDM/SBR gasket seals door to housing.|
|Housing||Die-formed prime grade material as specified – see Ordering Information. TIG and spot welded construction.|
|Installation||SURFACE MOUNT: Four .312" diameter holes. FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.|
|Lamp Shielding||Perforated metal (white TGIC polyester powder coat finish) with pearlescent acrylic diffuser.|
|LED Module||Serviceable tunable-white, mid-power LED array provides 2700K through 6500K CCT range with a two-point path. Minimum 82 CRI standard (R9 >20) with optional minimum 90 CRI (R9 >50).|
|Listings|| Luminaire is certified to UL Standards by Intertek Testing Laboratory for
Wet Location and non-IC recessed installation. ETL certified
IP65 per IEC 60598. NSF2 Splash/Non-Food Zone.
Photometry tested to IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.
Approved by the New York State - Office of Mental Health.|
|Optics||Extruded high-efficiency frosted DR acrylic inner diffuser. Clear impact-resistant outer lens as specified—see Ordering Information.|
|Patent||U.S. Patent No. D562,767 – Low Voltage Controller (LVC) option.|