| Controls | TekLink™ TL50 is an independent lighting control system integral to the luminaire, featuring its own embedded occupancy sensor and adjustable time-out/dimming settings and a closed-loop daylight harvesting function for maximum energy savings. TekLink™ TL100 is a centralized, wired zonal occupancy and closed-loop daylight harvesting control system. TL100 controllers are standalone devices and are ordered separately from the luminaire(s). MS Option: Optional embedded microwave motion sensor mounted behind the diffuser. Remote adjustment for dim level, timeout period and sensor sensitivity settings. Factory default is 30% dimming and 20min. timeout. Sensor operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage at various mounting heights and coverage areas. Available with compatible third party controls. |
|---|
| Driver | 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA maximum source current. |
|---|
| End Caps | Marine grade die-cast aluminum. Four styles available: Flat, Rounded, Reveal and Stepped. Conduit and ”Wiremold™ ready” knockout visible only from interior of end cap (For Flat and Rounded styles only). |
|---|
| Hardware | Stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel (eight on 72" and 96" housings, four on 24" and 48" housings). |
|---|
| Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Closed cell EPDM and silicone gasketing along lens channel and end caps. TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for available finishes. |
|---|
| Installation | Surface ceiling, vertical or horizontal wall, corner mount (CMB) or suspended pendant mounting (PM). Standard four-point mounting (two-point on 24" fixtures, eight-point on 96") required for Peace of Mind Guarantee®. Suitable for -30°C to 40°C ambient environments, unless otherwise noted. |
|---|
| LED Module | Serviceable mid-power LED array. Minimum 80 CRI standard (R9>0), consult factory for optional 90CRI (R9>50). Maximum three-step MacAdam ellipse variation. See Ordering Information for available color temperature options. |
|---|
| Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for wet location – covered ceiling mount. Corner, horizontal wall, vertical wall and pendant mount installation – damp location only. ETL certified IP64 in compliance with IEC 60598 – ceiling mount. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
|---|
| Optics | UV-Stabilized, high-efficiency diffused polycarbonate with smooth exterior and linear prismatic interior. Lens securely positioned in body channels and endcaps, locked into place with concealed tamper-resistant Torx ® T-20 with center pin fasteners. |
|---|
| Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
|---|
| Warranty | Limited ten (10) year LED warranty. Peace of Mind Guarantee against breakage. |
|---|