Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

MLHA5-TW

Millenium Stretch

MLHA5-TW Main Image
MLHA5-TW Main Image
Model #: MLHA5-TW
Features:
  • High-output, high CRI LED lamp sources with 2700K-6500K white tuning capability
  • Extruded and die-cast aluminum construction
  • Peace of Mind Guarantee™ against breakage
Application(s):Parking Garage
Parks and Recreation
Packaging and Staging
Kitchen and Food Prep
Locker Rooms
Multifamily Housing
Cafeterias
Walkways
Washrooms (Correctional)
Restrooms
Stairwells
Showers
Dorm Rooms
Schools and Universities
Transportation Platforms
Foyers and Lobbies
Corridors
Sally Ports
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Natatoriums
Manufacturing
Lens Type(s):Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):12"W
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Driver/Controls120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details.
End CapsMarine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for available finishes.
InstallationStandard six-point mounting required for Peace of Mind Guarantee®. Suitable for installation into -30°C to 40°C ambient environments, unless otherwise noted.
LED ModuleServiceable tunable-white, mid-power LED array provides 2700K through 6500K CCT range with a two-point path. Minimum 82 CRI standard (R9 >20) with optional minimum 90 CRI (R9 >50).
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount. ETL certified IP64 per IEC 60598. Damp rated – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant.
OpticsUV-stabilized, high-impact extruded pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with four (4) tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets. Full reflector/wire cover with 92% reflectivity.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty for LED Lamps. Peace of Mind Guarantee™ when installed as noted above.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

top