•  

CC-ICT

Mighty Mac

Main Product Image
Model #: CC-ICT
Features:
  • Provides on-demand environmental disinfection via LED light
  • Single, white disinfection mode
  • Independent laboratory tested to kill harmful bacteria, including Staph*, such as MRSA**
  • Surface corner mount with hinged clamshell construction
  • TIG-welded housing without post-weld grinding for additional strength
  • Clamshell design prevents contraband concealment
Application(s):Cells
Dayrooms (Correctional)
Locker Rooms
Washrooms (Correctional)
Restrooms
Stairwells
Showers
Sally Ports
Behavioral Health
Lens Type(s):No Lens
.125" Prismatic Acrylic
.125" #12 Prismatic Polycarbonate
.125" Textured Polycarbonate
.156" Prismatic Polycarbonate
.187" Prismatic Polycarbonate
.187" Clear Polycarbonate
.187" Clear Tempered Glass
.250" Clear Polycarbonate
.250" Clear Tempered Glass
.375" Clear Polycarbonate
.375" Clear Tempered Glass
.125" Clear Polycarbonate
.500" Clear Polycarbonate
.750" Clear Tempered Glass
.500" Clear Tempered Glass
.156" Textured Tempered Glass
.007" Diffuser Film
Lamp Type(s):LED
Size(s):9"×48"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate Prime grade material as specified – see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
Electrical Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 800μA maximum source current. Single, white disinfection mode.
Fasteners Hardened security screws as specified – see ordering information. Fully recessed.
Finish TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Hinge 2' continuous heavy gauge internal piano hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes. See Options for Full Length Internal Hinge (IHF) (standard on 1' housing).
Housing One-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contraband concealment.
Installation Corner mount, surface; Fixture not suitable for Surface Conduit or Continuous Row Mounting.
Lens As specified – maximum thickness .875" – see ordering information. Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot be provided.
Lens Retention Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing).
Listings UL and CUL listed for damp locations. LED only: Luminaire is certified to UL 1598 and UL 8750 standards by Intertek Testing Services. See ordering information for wet location applications. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
Luminous Seal Polyurethane foam prevents light leaks from luminaire base.
Warranty Limited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top