| Baseplate | One-piece 16-gauge CRS baseplate with welded corners. Baseplate provided with four-point (2, 3, and 6 foot) or six-point (4 foot) mounting holes and one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel Torx® fasteners (two fasteners/2 and 3 foot; six fasteners/4 and 6 foot). Baseplate/end caps mount flush to ceiling or wall surface. |
|---|
| Electrical | LED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 165µA max. source current. Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims down to 30%. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. |
|---|
| Hardware | Stainless steel Torx® with center pin fasteners secure lens in baseplate channel. |
|---|
| Installation | Four-point (2 foot and 3 foot) or six-point (4 foot) mounting required for Peace of Mind Guarantee®. |
|---|
| Lens | Cold formed .156" P12 polycarbonate lens. See Options for alternate lenses. |
|---|
| Listings | UL and CUL listed for Wet Location – covered ceilings only. UL and CUL listed for Damp Locations – wall mount. ADA Compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|