•  

SA26

SenScape

SA26_HS01.png
SA26_HS01.png
Model #: SA26
Features:
  • Architectural, modern design aesthetic scaled for mounting heights of 15-30 feet
  • Multiple mounting configuration and optical distribution options to suit all common area lighting scenarios
  • TekLink advanced wireless networked control and innovative Integrated Camera Module options
  • Lumen outputs up to 43,000lm with color temperatures ranging from 3000K to 5000K
Application(s):Area/Site Lighting
Lens Type(s):.250" Clear Tempered Glass
Pearlescent
Lamp Type(s):LED
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalReplaceable high-brightness LED array. See Ordering Information for color temperature options. 120-277VAC, 347VAC or 480VAC, 50/60Hz input with replaceable high power factor electronic constant-current driver (<10% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range. Minimum 85% driver efficiency. EMC performance compliant with FCC CFR Part 15.  Serviceable surge protection device rated to 6kV per ANSI C62.41-2002 category C low.
HousingMarine-grade die-cast aluminum construction. Integral aluminum heat sink with concealed air inlet and convection fins. All power electronics removed from primary thermal path; all drivers with dedicated heatsink to exterior of luminaire. TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell silicone gasketing at all housing interfaces.
Integrated Camera ModuleFlexible integration with 3rd party video or security platforms via WiFi or Ethernet.  Camera supports 1080p at 30 frames per second. The ICM option is a stand-alone camera independent of the TekLink system.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. Luminaire is 3G tested for vibration per ANSI C136.31. Suitable for installation into -30°C to 40°C ambient environments.
MountingPost Top: Fitter assembly mounts over a 2-3/8" tenon on 3, 4 and 5 inch round and square poles and secured via six recessed, corrosion resistant set screws.  Fitter design provides gentle transition to 3" O.D. round pole. Pole Mount: Internal bracket and hardware provided for drilled round and square 3 inch and larger poles. Wall Mount: Quick and simple mounting bracket allows four point mounting to rigid walls.
OpticalType II, III, IV and V Square optical distributions. Each type available with Narrow, Medium and Wide options for glare mitigation (Wide has the lowest level of glare mitigation, Narrow the highest). Internal house-side shield available (does not impact EPA). Injection-molded acrylic or polycarbonate tertiary outer lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric data, please go to www.kenall.com.
TekLink TL2000An adaptive lighting control system that utilizes a wireless communication scheme between system nodes.  In addition to occupancy detection via camera and daylight harvesting, the TL2000 system features advanced scheduling and energy management capabilities with cloud-based control of system settings, reporting, and notifications.
WarrantyLimited five (5) year warranty.

 

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

  LOOKING FOR PRICING?
Find a Rep

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top