Millenium Stretch
| Model #: | MLHA3-BIOS |
|---|---|
| Features: |
|
| Application(s): | Parking Garage Parks and Recreation Packaging and Staging Kitchen and Food Prep Locker Rooms Multifamily Housing Cafeterias Walkways Washrooms (Correctional) Restrooms Stairwells Showers Dorm Rooms Schools and Universities Transportation Platforms Foyers and Lobbies Corridors Sally Ports Exteriors and Entryways Gymnasiums and Multipurpose Rooms Natatoriums Manufacturing |
| Lens Type(s): | Frost High Impact Acrylic Pearlescent Polycarbonate |
| Lamp Type(s): | LED |
| Size(s): | 3"W |
| Listings: |
Technical Specifications
| Driver/Controls | 120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Biological Static: Serviceable, constant-current single channel driver with single analog (0-10V) control input for intensity. 1-100% range with dim to dark capabilities and a linear dimming curve. Biological Dynamic: Serviceable constant-current driver with the BIOS Dynamic Bio-Dimming™ module keeps light output constant while reducing melanopic lux. Single analog (0-10V) control input. 1-100% dimming range with dim-to-dark capabilities and a linear dimming curve. Dimming from 100-75% reduces CCT by 500K, dimming below 75% reduces light level. Biological Tunable: Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. |
|---|---|
| Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Two end cap styles available - Flat and Round. Conduit and Wiremold™ ready knockout visible only from interior of end cap. Closed cell EPDM and silicone gasketing along lens channel and end caps. |
| Installation | Surface ceiling, vertical or horizontal wall, corner mount (CMB) or suspended pendant mounting (PM). Standard four-point mounting required for Peace of Mind Guarantee®. Suitable for installation into -30°C to 40°C ambient environments, unless otherwise noted. |
| LED Module | Serviceable static, dynamic or tunable mid-power Gen 2 BIOS Biological LED modules. Biological Static, Biological Dynamic, and Biological Tunable LED source with blue spectrum peak at 490nm and higher melanopic ratio. CRI 80+ with R9 > 90. Dynamic features 500K downward CCT shift when dimmed for evening applications requiring lower melanopic ratio. Tunable features 2700K CCT for evening applications. Refer to table for specific melanopic values. |
| Listings |
Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount. Corner, horizontal wall, vertical wall and pendant mount installation – Damp Location only. ETL certified IP64 in compliance with IEC 60598 – ceiling mount. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08.
|
| Optics | UV-Stabilized, high-efficiency diffused polycarbonate or high-performance, impact-modified diffused acrylic material options. Lens securely positioned in body channels and endcaps, locked into place with concealed, tamper-resistant Torx ® T-20 with center pin fasteners. |
| Photometrics |
Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
|
| Warranty |
five (5) year LED warranty. Peace of Mind Guarantee against breakage.
|
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
Downloads
Product Documentation
Installation Files
Photometry (IES)
Additional Resources
| Model #: | MLHA3 |
|---|---|
| Features: |
|
| Application(s): | Parks and Recreation Kitchen and Food Prep Multifamily Housing Walkways Washrooms (Correctional) Restrooms Stairwells Showers Dorm Rooms Schools and Universities Transportation Platforms Foyers and Lobbies Corridors Sally Ports Exteriors and Entryways Gymnasiums and Multipurpose Rooms Natatoriums |
| Lens Type(s): | Frost High Impact Acrylic Pearlescent Polycarbonate |
| Lamp Type(s): | LED |
| Size(s): | 3"W |
| Listings: |
Technical Specifications
| Controls | TEKLINK™ TL50DM is an independent lighting control system integral to the luminaire, featuring its own embedded occupancy sensor and adjustable time-out/dimming settings and a closed-loop daylight harvesting function for maximum energy savings.TEKLINK TL200M is a wireless, zonal occupancy control Bluetooth® Low Energy system (BLE v5.2) with embedded sensor. Mobile app for Android and iOS device allows changes to time-out period, turn-off delay and light level. System commissioning is not required - network is operational upon power-up. MS OPTION: Optional embedded microwave motion sensor mounted behind the diffuser. Remote adjustment for dim level, timeout period and sensor sensitivity settings. Factory default is 30% dimming and 20min. timeout. Sensor operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage at various mounting heights and coverage areas. Available with compatible third party controls. |
|---|---|
| Driver | 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); maximum 165 µA maximum source current. Optional eldoLED ECOdrive DALI drivers with 1-100% range. |
| Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Two end cap styles available - Flat and Round. Conduit and Wiremold™ ready knockout visible only from interior of end cap. Closed cell EPDM and silicone gasketing along lens channel and end caps. TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for available finishes. |
| Installation | Surface ceiling, vertical or horizontal wall, corner mount (CMB) or suspended pendant mounting (PM). Standard four-point mounting (two-point on 2' and 3' fixtures) required for Peace of Mind Guarantee®. Suitable for -30°C to 40°C ambient environments, unless otherwise noted. |
| LED Module | Serviceable mid-power LED array. Light output specified in lumens per foot for consistent light output across luminaires in various length configurations. Minimum 80 CRI standard (R9>0), optional 90CRI (R9>50). Maximum three-step MacAdam ellipse variation. See Ordering Information for available color temperature options. |
| Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount. Corner, horizontal wall, vertical wall and pendant mount installation – Damp Location only. ETL certified IP64 in compliance with IEC 60598 – ceiling mount. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
| Optics | UV-Stabilized, high-efficiency diffused polycarbonate or high-performance, impact-modified diffused acrylic material options. Lens securely positioned in body channels and endcaps, locked into place with concealed, tamper-resistant Torx ® T-20 with center pin fasteners. |
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. |
| Warranty | Limited ten (10) year LED warranty. Peace of Mind Guarantee against breakage. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
Downloads
Product Documentation
Installation Files
Photometry (IES)
REVIT Files
Additional Resources
| Model #: | MLHA3-ICT |
|---|---|
| Features: |
|
| Application(s): | Parking Garage Parks and Recreation Packaging and Staging Kitchen and Food Prep Locker Rooms Multifamily Housing Cafeterias Walkways Washrooms (Correctional) Restrooms Stairwells Showers Dorm Rooms Schools and Universities Transportation Platforms Foyers and Lobbies Corridors Sally Ports Exteriors and Entryways Gymnasiums and Multipurpose Rooms Natatoriums Manufacturing |
| Lens Type(s): | Frost High Impact Acrylic |
| Lamp Type(s): | LED |
| Size(s): | 3"W |
| Listings: |
Technical Specifications
| Electrical | (Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance. Minimum 80 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non-dim-to-dark on Dual-Mode ICT). 165μA maximum source current. Single-Mode ICT provides a single, white disinfection operational mode. Dual-Mode ICT provides two operational modes based on room occupancy. White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection. Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy. The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system, such as the IC150 product. Luminaire dimming is overridden in this operational state. Refer to the Kenall Dual-Mode ICT Control Application Guide for further description. |
|---|---|
| Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Two end cap styles available - Flat and Round. Conduit and Wiremold™ ready knockout visible only from interior of end cap. Closed cell EPDM and silicone gasketing along lens channel and end caps. |
| Installation | Standard four-point mounting required for Peace of Mind Guarantee®. Suitable for installation into -30°C to 40°C ambient environments, unless otherwise noted. |
| Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount. ETL certified IP64 in compliance with IEC 60598 – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant. EPA Est. No. 99283-WI-1. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
| Optics | Impact-modified diffused acrylic. Lens securely positioned in body channels and endcaps, locked into place with concealed, tamper-resistant Torx ® T-20 with center pin fasteners. |
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com. |
| Warranty | Limited five (5) year LED warranty. Peace of Mind Guarantee against breakage. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.