Skip to Content
Kenall Manufacturing - Homepage
Main Content

MR13CL

Millenium Rounds

MR13CL Main Image
MR13CL Main Image
Model #: MR13CL
Features:
  • Surface mount – ceiling or wall; 13"Dia. ×4"D
  • Peace of Mind Guarantee® against breakage
  • Dust and water protected to IP64 standards
  • ADA compliant
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Exteriors and Entryways
Natatoriums
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):13"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateMarine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting breakouts. See installation detail. Standard black, bronze or white exterior TGIC polyester powder coat – 5-step pre-treatment. See Ordering Information for optional finishes.
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketingDie-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens base, baseplate and optional surface adapter.
HardwareOne stainless steel Torx® with center pin fastener.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
Lens Base/GrilleLens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom Color (see Ordering Information below) are chemically bonded, impact resistant finishes.
ListingsUL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
PatentU.S. Patent No.6,042,251.
ReflectorFull reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top