MPWUD Main Image
MPWUD Main Image
Model #: MPWUD
  • Surface wall mount – 24", 36" & 48" lengths
  • Multi-functional – ambient and reading
  • Marine grade aluminum body with die-cast end caps
  • Lens with internal prisms, smooth exterior lens for ease of cleanability
  • Standard antimicrobial finish
Application(s):Patient Rooms
Lens Type(s):Clear Prismatic Polycarbonate
Frost High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate16-gauge CRS baseplate provided with four-point (24" housing) or six-point (36" housing) mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
ElectricalFluorescent electronic 120/277/347V ballasts high power factor (<10% THD). One ballast per lamp compartment. See Ordering Information for optional equipment. Lamps by others. Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA.
HousingMarine grade aluminum body with die-cast end caps. Housing attached to mounted baseplate. Housing secured with countersunk fasteners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Matte white antimicrobial finish standard on exposed surfaces of installed luminaire.
InstallationStandard four-point (24" housing) or six-point (36" & 48" housing) mounting.
LensUV-stabilized, high impact resistant, extruded linear DR/acrylic (50/50 blend). Smooth exterior, fluted interior. Nominal thickness .125". Lens securely positioned in body channels.
ListingsUL and CUL Listed for Damp Location. Certified by independent lab to meet OSHPD seismic loading standard. Pre-approved by OSHPD for installation in California healthcare facilities.
Lumen DataMPWUD Lumen Data
PatentU.S.Patent No. D562,767 on low Voltage Controller (LVC) option.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.