Skip to Content
Kenall Manufacturing - Homepage
Main Content

MLHA5V

Millenium Stretch

MLHA5V Main Image
MLHA5V Main Image
Model #: MLHA5V
Features:
  • Surface mount – wall; 5"×24", 36" and 48"
  • Extruded aluminum housing with decorative end caps
  • Low-profile –ADA compliant
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Multifamily Housing
Washrooms (Correctional)
Restrooms
Dorm Rooms
Patient Rooms
Schools and Universities
Foyers and Lobbies
Corridors
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Size(s):5"W
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; maximum driver source of 165μA. Consult factory for flourescent options.
End CapsMarine grade die-cast aluminum. Four styles available: Flat, Rounded, Reveal and Stepped.
HardwareFour stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel.
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional and custom finishes.
InstallationStandard two-point (24" housing), four-point (36" and 48" housing) mounting required for Peace of Mind Guarantee®
LensUV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsListed to UL for Damp Location – horizontal and vertical wall mount. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited ten (10) year warranty for LED Lamps.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

REVIT Files

Additional Resources

top