Skip to Content
Kenall Manufacturing - Homepage
Main Content


MedMaster Auracyl Sconce

MAS813 Main Image
MAS813 Main ImageAuracyl Lenses
Model #: MAS813
  • Wall mount – 8"×13"
  • Sealed marine-grade extruded aluminum
  • Sealed backlighting creates a pleasing visual accent and NSF2 listing
  • Standard antimicrobial finish for cleanability
Application(s):Nursing Stations
Patient Rooms
Foyers and Lobbies
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Decorative Outer LensAcrylic translucent white lens standard. Nominal thickness .125". Optional decorative Lumicor® resins – see Ordering Information.
Electrical120V-277V or 347V high power factor electronic fluorescent ballast (<10~25%THD). Replaceable high-brightness ANSI 3000K or 4000K white LED array with integral 120V or 277V electronic driver. LED dimming capability controlled through compatible 0-10V dimmer (supplied by others). 10%-100% dimming range.
HardwareOne stainless steel Phillips head fastener standard. Four stainless steel Phillips head fasteners with IP64 option. Internal brackets and fasteners are non-corrosive.
HousingMarine grade extruded aluminum. Marine grade die-cast aluminum end caps. TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. Antimicrobial finish standard on exposed painted aluminum surfaces of installed luminaire.
Inner LensUV-stabilized, high impact resistant, extruded 100% DR/acrylic frost lens. Nominal thickness .100". Lens secured in place by lens frame.
InstallationStandard four-point mounting required.
ListingsUL and CUL listed for Damp Location – covered ceiling and wall mount. NSF2 Splash/Non-Food Zone. ADA Compliant. Optional IP64 certified per IEC 60598. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux. Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
PatentU.S. Patent No. 7,029,139; D610,294.
PhotometricsFor photometric information, go to
ReflectorDie-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.


Product Documentation

Photometry (IES)


Additional Resources