| Controls | Integrated low-voltage controller with dimming (LVCD) for pillow-switch/wall-control of ambient, exam and reading modes. “Ambient” mode operates the primary light engine at 50% output. A sustained button press on the wall/bed controller sweeps light intensity (dimming) from 50% down to 0% (bi-directionally). “Exam” mode operates the primary light engine at 100% output. Dimming is not possible in “Exam mode. “Reading” mode operates an integral secondary light engine positioned nearest the headwall. A sequential button press on the wall/bed controller changes intensity (100%/66%/33%) bi-directionally. Optional secondary conduit entry available. |
|---|
| Driver/Controls | 120-277VAC, 50/60Hz electrical input with serviceable constant-current drivers (<20% THD, >0.90 PF). See ‘CONTROL’ for dimming information. Minimum 85% driver efficiency. |
|---|
| Housing | Extruded 6063-T5 aluminum construction with aluminum endcaps. Low-gloss anti-microbial white TGIC polyester powder coat finish with five-stage pre-treatment. Silicone gasketing throughout. |
|---|
| Installation | Suitable for Type-IC recessed ceiling installation into 9/16” and 15/16” lay-in and tegular grid ceilings, flanged drywall ceilings and trimless mud-in installations with 5/8” drywall. See Ordering Information for Ceiling Type selection. Suitable for 0°C - 40°C ambient temperature environments. |
|---|
| LED Module | Serviceable mid-power LED array. Minimum 82 CRI standard (R9>20). See Ordering Information for available color temperature options. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Type-IC and Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance. Meets FED-STD-209E/Class 100 (ISO 5) Cleanrooms. |
|---|
| Optics | Standard 20° asymmetric distribution for all functions. Must specify Left- and Right-Throw for offset paired mounting over bed. Snap-in, one-piece extruded frost DR acrylic diffuser.
|
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For detailed photometric information, please visit www.kenall.com. |
|---|
| Warranty | Limited five (5) year warranty. |
|---|