| Electrical | High-power white LED array and high-power 405nm indigo LED array. Available 3700K and 4300K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 80 CRI standard with optional minimum 90 CRI available. 120/277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constantcurrent drivers (0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range with dim-to-dark capabilities in White Disinfection Mode. 250 μA maximum source current. Two operational modes: White Disinfection Mode is a white LED array for ambient lighting plus simultaneous low-power 405nm indigo array for low-level continuous environmental disinfection. Indigo Disinfection Mode is a high power 405nm Indigo LED array for continuous environmental disinfection. Operational mode determined via internal low-voltage device based upon input provided by external IC100 room control system. EMC meets or exceeds MIL STD 461G conducted requirements. |
|---|
| Heatsink | Die-cast aluminum with external radial fins for natural convection. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP64 (Meets FED-STD-209E/Class 100 ISO 5 Cleanrooms) and IP65 (Meets FED-STD-209E/Class 1 ISO 3 Cleanrooms) rating per IEC60598. NSF2 Splash/Non-Food Zone. Conducted emissions controlled as per MILSTD 461G. Optional CCEA compliance. EPA Est. No. 99283-WI-1. |
|---|
| Optical | Mixing chamber design with regressed diffused tempered-glass lens produces uniform light output. Flush lens trim options include a clear impact-resistant acrylic lens. See distribution and reflector finish ordering information for available options. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com. |
|---|
| Rough-In Frame | 18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Universal mounting brackets accept 3/4" and 1-1/2" lathers channel, 1/2" EMT conduit and hanger bars. Quick-access junction box accessible post-installation from above and below ceiling. Includes (4) 1/2" and (2) 3/4" knock-outs to allow straight conduit runs. Listed for (8) 12AWG, 90oC conductors and feed-thru branch wiring. Provided with FMC with electrical quick-connect to Trim Section. |
|---|
| Trim/Housing Section | IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Configurable with an IP64-rated Regressed or Flush lens trim that is secured to the Rough-In frame with hidden torsion springs, and an IP65 Flush lens trim secured with four (4) phillips head, captive fasteners. Anti-microbial finish standard on all exposed painted surfaces. See trim ordering information for available options. |
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|