|END-MOUNT JUNCTION BOX: Attaches to an end-located LTL luminaire within a continuous or discontinuous run. Allows for connection to RD700 via ¾” or 1” trade size sealed conduit. Includes two (2) conduit entry points for left/right entry or pass-through for multiple-row LTL installations. MID-MOUNT JUNCTION BOX: Installs mid-way within a continuous run of LTL luminaires. Allows for connection to RD700 via ¾” or 1” trade size sealed conduit. Includes two (2) conduit entry points for left/right entry or pass-through for multiple-row LTL installations. RUN TERMINATION COVER: Terminates the raceway at the end of a continuous or discontinuous run of LTL luminaires.
|Serviceable high-brightness LED array. See Ordering Information for color temperature options. 65 CRI minimum. Powered by remotely-located RD700 distributed constant-current DC supply. Four 8' fixtures are powered by one driver supply. See Circuit Detail for information on load configuration requirements.
|One-piece extruded silicone with molded corners.
|Raceway mounting hardware provided by others. 14-18AWG DC branch conductors (by others) for up to six (6) circuits run within raceway. Provided wire taps and two-position electrical connector allow for quick connect/disconnect of the light engine from the DC supply. Ambient temperature rating is -40°C to 50°C.
|Light Engine Housing
|18-gauge Type 304 or Type 316 stainless steel doorframe with one-piece, seam-welded construction; 2B finish; passivated post-welding. Stainless steel safety cables attach to raceway. Lockable rotary latches (lock by others) constructed of matching grade stainless steel. Internal marine-grade aluminum heat sink.
|Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP66 rating per IEC 60598. Rated to NEMA 4X. Luminaire is 3G vibration tested per ANSI C136.31. Passes ANSI C136.27-2012 qualification test.
|Type II and Type V Square optical distributions. Clear tempered glass or polycarbonate lens.
|Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.
|18-gauge Type 304 or Type 316 stainless steel enclosure with one-piece, seam-welded construction; 2B finish; passivated post-welding. 16-gauge die-formed and welded mounting points; custom mounting detail to tunnel structure available.
|Limited ten (10) year warranty.