Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

LPSR5MRI

Low Profile Sconce

LPSR5MRI Main Image
LPSR5MRI Main Image
Model #: LPSR5MRI
Features:
  • Semi-recessed wall mount, non-ferrous construction
  • One-piece die-cast aluminum frames with edge-lit LED lamp source
  • Optional decorative lens materials
  • Simple-to-clean construction—meets NSF2 requirements
  • Product meets California OSHPD requirements
Application(s):MRI Imaging Suites
Lamp Type(s):LED
Size(s):12"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical24VDC luminaire input from remote-mounted, 120-240VAC, high-power-factor power supply (MRIPS-312, ordered separately). Dimming controlled through 0-10V dimmer (supplied by others). Dimming range down to 10% light output.
HousingMarine-grade die-cast aluminum frame. Frame serves as LED heat sink. Die-formed and welded aluminum driver enclosure, TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell gasketing at all housing interfaces.
Installation One (1) concealed fastener secures frame assembly to mounting plate. Mount frame to provided recessed backbox. Specify new or remodel construction. All power and signal wiring must be completely shielded in continuously grounded aluminum conduit. Light engine and internal driver are replaceable post-installation. MRI room EMI filters required (supplied by others).
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location. NSF2 Splash/Non-Food Zone. ADA compliant. California OSHPD compliant. Photometry tested to the IESNA LM-79 standard by an ILAC/ISO17025 accredited laboratory.
Lumen DataLPSR5MRI Lumen Data
NoteCustom decorative lenses and color-coordinated custom color frames are available.
OpticalInternal laser-etched acrylic light guide for uniform luminance from edge-lit LED light source. Thin film polycarbonate diffuser; white appearance when unlit (standard outer lens). Optional decorative lens finishes are internally laminated with a matte outer finish.
Patentpatent: U.S. Patent No. 8,575,841, No. D687,177 S, No. D687,178 S.
WarrantyScanSafe Guarantee™ provides a one year warranty against MRI room interference and susceptibility. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not shielded in continuously grounded aluminum conduit.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top