Millenium FreeScale for Architectural High Abuse

FS548T Main Image
FS548T Main ImageFreeScale Inner PerfFreeScale Triangle Lens
Model #: FS548T
  • Surface mount – wall or ceiling; 8"W×53"L×4"D
  • Marine grade aluminum baseplate
  • Triangle 100% DR acrylic lens options with multiple bar configurations
  • ADA Compliant
  • UL certified IP65 per IEC 60598
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Schools and Universities
Foyers and Lobbies
Lens Type(s):Matte Pearlescent High Impact 100% DR Acrylic
Pearlescent High Impact 100% DR Acrylic
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateDie-formed marine grade aluminum; welded corners. Baseplate provided with six-point mounting holes, one wireway hole. TGIC Polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours.
ElectricalFluorescent electronic 120-277V and dual voltage ballasts high power factor (<10% THD). Replaceable high-brightness ANSI 4000K white LED array, 120V high power factor electronic driver.
HardwareSix stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – stainless steel trim frame assembly with integral J-box; finished to match lens frame (not available with CA finish). Watertight conduit fittings supplied by others. Caulk Plate (CP) accessory – stainless steel plate (adds .625" height) finished to match lens frame (n/a with CA finish). Stainless steel fasteners provided for mounting fixture to CP or SCA.
InstallationStandard six-point mounting required for Peace of Mind Guarantee®.
LensUV-stabilized, high impact resistant, pressure formed pearlescent 100% DR acrylic. Nominal thickness .125". Lens secured in place by lens frame and sealed to baseplate with closed cell silicone gasket.
Lens Frame/Cross BarsMarine grade aluminum; secured to baseplate with tamper-resistant stainless steel Torx® with center pin fasteners. Cross bars nominal thickness .25". Post assembly TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. Optional perf insert 30% open, stainless steel.
ListingsUL and CUL listed for Wet Location. UL certified IP65 in compliance with IEC 60598. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Patent7,029,139; D525,386; D526,082; D527,135; and D527,483.
PhotometricsFor photometric information, go to www.kenall.com.
ReflectorDie-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.