•  

FS524T

Millenium FreeScale for Architectural High Abuse

FS524T Main Image
FS524T Main ImageFreeScale Inner PerfFreeScale Triangle Lens
Model #: FS524T
Features:
  • Surface mount – wall or ceiling; 5"W×29"L×4"D
  • Marine grade aluminum baseplate
  • Triangle 100% DR acrylic lens options with multiple lens frame styles
  • ADA Compliant
  • UL certified IP65 per IEC 60598
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Schools and Universities
Foyers and Lobbies
Corridors
Lens Type(s):Matte Pearlescent High Impact 100% DR Acrylic
Pearlescent High Impact 100% DR Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):5"×24"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateDie-formed marine grade aluminum; welded corners. Provided with four-point mounting holes, one wireway holes. TGIC Polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. Consult factory for flourescent options.
HardwareFour stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – stainless steel trim frame assembly with integral J-box; finished to match lens frame (not available with CA finish). Watertight conduit fittings supplied by others. Caulk Plate (CP) accessory – stainless steel plate (adds .625" height) finished to match lens frame (not available with CA finish). Stainless steel fasteners provided for mounting fixture to CP or SCA.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LensUV-stabilized, high impact resistant, pressure formed pearlescent 100% DR acrylic. Nominal thickness .125". Lens secured in place by lens frame and sealed to baseplate with closed cell silicone gasket.
Lens Frame/Cross BarsMarine grade aluminum; secured to baseplate with tamperresistant stainless steel Torx® with center pin fasteners. Cross bars nominal thickness .25". Post assembly TGIC polyester powder coat - 5-stage pre-treatment; Salt spray test: 1,000 hours. Optional perf insert 30% open, stainless steel.
ListingsUL and CUL listed for Wet Location. UL certified IP65 in compliance with IEC 60598. ADA Compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Patent7,029,139; D525,386; D526,082; D527,135; and D527,483.
PhotometricsFor photometric information, go to www.kenall.com.
ReflectorDie-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top