Skip to Content
Kenall Manufacturing - Homepage
Main Content


EnviroSeal for Cleanroom & Containment

ES3 Main Image
ES3 Main ImageEnviroseal Pendant MountEnviroseal RelampEnviroSeal Continuous Row MountEnviroSeal Shock-resistant Socket
Model #: ES3
  • Surface mount – ceiling or wall; 3"×24", 3"×36", 3"×48", 3"×96"
  • Cold rolled steel or stainless steel housing for corrosion resistance
  • Continuous row mount for multiple luminaires
  • IP65 Option available
Application(s):Packaging and Staging
Locker Rooms
Biosafety and Containment
Multifamily Housing
Storage Facilities
Exteriors and Entryways
Research and Development
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalClass P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Available 3000K, 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA.
FinishBrushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.
HardwareOne Type 302 stainless steel Phillips head fastener secures lens in housing channel.
HousingOne-piece, seam-welded 20-gauge CRS. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface.
Lens/GasketUV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". IP65 option provided with linear silicone gasket to seal lens frame to housing.
ListingsUL and CUL listed for Wet Location – covered ceiling. UL and CUL listed for Damp Location – horizontal wall mount. Optional UL and CUL Listed for Wet Location (WW Option) – horizontal wall mount. Optional UL certified IP65 per IEC 60598 (IP65 Option) – ceiling mount. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyTwo-point mounting, polycarbonate lens and Torx® with center pin fastener (1) required for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources