High-brightness LED array. See Ordering Information for color temperature and CRI options. 80 CRI min. (12"), 70 CRI min. (16/22"). 120-277VAC, or 347VAC, 50/60Hz electrical input. Replaceable high power factor electronic, constant-current driver (<10% THD, >0.90PF). Minimum 85% driver efficiency. 12" MODEL: 0-10V dimming protocol with 1-100% range (includes dim-to-dark capabilities on 42L), 250μA max. source current. 16/22" Model: 0-10V dimming protocol with 10-100% range without dim-to-dark capabilities; 300μA max. source current.
|Housing||LED: Marine-grade die-cast aluminum construction on 16" and 22" models with convective fins for efficient thermal transfer from junction to ambient. Spun aluminum outer housing on 12" model with internal aluminum heatsink. Sealed center hub for pendant and hook & loop mounting. Non-LED: 0.063" corrosion-resistant spun aluminum. Gloss white TGIC polyester powder coat, 5 stage pre-treatment. Salt-spray test: 1,000 hours. Sealed hub for pendant or hook & loop mounting.|
|Installation||Tool-free lamp access. LOOP HANGER: Top hub with loop style hanger and 6' black power cord. IP65 sealed connector. Hook by others. Center of gravity along center axis of luminaire. PENDANT: Sealed threaded hub supplied for ½" diameter rigid pendant (12" size) and ¾" diameter rigid pendant (16"/22" size). Pendant components by others. Ambient temperature ratings: -40°C – 40°C (92L/94L), -40°C – 25°C (all others).|
|Listings||Listed to UL Standards by Intertek Testing Laboratory for Wet Location (Enclosed) and Dry Location (Open). Enclosed version rated IP65 per IEC 60598. Enclosed version certified to NSF2 Splash/Non-Food Zone. |
|Lumen Data||EPLB Lumen Data|
|Reflector/Lens Assembly||REFLECTOR (ACA, ACP, AO): .063" corrosion-resistant spun aluminum reflector, sealed to housing with continuous closed-cell gasket. Standard gloss white highreflectance TGIC polyester powder coat on spun reflector with 5-stage pre-treatment. Reflectance 90%. Salt spray test: 1,000 hours. For additional reflector finishes, see Ordering Options below. RMH Option: Finish matches housing finish only—inside will remain gloss white. REFRACTOR (CA, CP): Clear prismatic UV-stabilized acrylic or polycarbonate reduces contrast and improves uniformity utilizing its inherent uplight component, sealed to housing with continuous closed-cell gasket. REFRACTOR (PPA): Pearlescent Prismatic UV-stabilized acrylic providing specifically tailored uplight and downlight levels, sealed to housing with continuous closed-cell gasket. ENCLOSED (E): Available with either a spun aluminum reflector or acrylic/polycarbonate refractor, and a clear prismatic acrylic or polycarbonate drop (bottom) lens.|
|Warranty||Limited five (5) year warranty for defects resulting in a fixture lumen depreciation of 30% or greater.|