Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

CSEFL24-Red

SimpleSeal

CSEFL24-Red Main Image
CSEFL24-Red Main ImageAircraft CableFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: CSEFL24-Red
Features:
  • Narrow-spectrum 630nm red LED circuit provides only high-purity light for spectrally-sensitive applications.
  • High-output, high-CRI white LED circuit provides visual acuity and accurate color rendition.
  • Diffused high-efficiency lens for reduced glare
  • One-piece seam welded housing with extended flange assures seal against rough ceilings
  • One-piece lapping door provides air-tight integrity of luminaire
  • Flanged for drywall or plaster ceilings.
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Industrial Food Processing Facilities
Lamp Type(s):LED
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeHeavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. (12) for 1×4, (10) for 2×2, (14) for 2×4. Doorframe Gasket: One-piece closed cell extruded nitrile gasket seals doorframe to housing flange.
ElectricalReplaceable white mid-power LED array. Available 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Minimum 82 CRI, R9>0. 630nm red mid-power LED array (16nm FWHM bandwidth). 120/277VAC or 347VAC, 50/60Hz electrical input with replaceable high power factor electronic, constant-current driver (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities on white and red circuit (non dim-to-dark with 347V). 495 μA max. source current per circuit. White circuit and red circuit can be independently powered and dimmed.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Housing flange is 18-gauge stainless steel or aluminum with mitered and welded corners. Flange finish matches doorframe except when PAH Housing Option (flange is painted white aluminum).
InstallationAdjustable swing-out mounting brackets standard. See Options for continuous row mounting and plaster frames.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location.Certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for BSL 1-4 laboratories.
OpticsSymmetric optic includes diffused, impact-resistant acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top