•  

CSEDO22-Red-TW

SimpleSeal

CSEDO22-Red-TW_HS01.png
CSEDO22-Red-TW_HS01.pngAircraft CableFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: CSEDO22-Red-TW
Features:
  • Narrow-spectrum 630nm red LED circuit provides only high-purity light for spectrally-sensitive applications
  • High-output, tunable white LED circuit provides visual acuity and accurate color rendition with an adjustable color spectrum
  • Diffused high-efficiency lens for reduced glare
  • One-piece inset doorframe, secured to housing with aircraft cables
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
Application(s):Pharmaceutical
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Lamp Type(s):LED
Size(s):24"×24"
Listings:         
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (8) for 2×2, (12) for 2×4. Thumb screws used for FN option.
Doorframe GasketOne-piece closed cell extruded Nitrile gasket seals Doorframe to housing and ceiling structure.
Driver120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. Tunable white circuit can be independently powered and dimmed. TW: Serviceable, constant-current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details. RED: Serviceable constant-current programmable driver. Dimming protocol matches tunable white circuit selection: 0-10V dimming with 1-100% range and dim-to-dark capabilities or DALI with 1-100% range and dim-to-dark capability.
HousingStandard 24-gauge (optional 20-gauge) cold rolled steel, hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationNon-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into grid or flange (drywall) ceiling applications. See Options for continuous row mounting and install frames.
LED ModuleServiceable tunable-white, mid-power LED array provides 2700K through 6500K CCT range with a two-point path. 3-step MacAdam variation allowance on each CCT. Minimum 82 CRI standard (R9 >20) with optional minimum 92 CRI (R9 >50). Serviceable 630nm red mid-power LED array (16nm FWHM bandwidth).
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Locations and non-IC recessed installation. Certified IP66 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for biosafety labs rated BSL 3 and 4. Optional NSF Protocol P442 certified. FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Optional NSF2 Food Zone/Non-Contact. Suitable for EU GMP Grade A cleanrooms.
OpticsSymmetric optic includes diffused, impact-resistant acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

 

Challenging Lighting Applications... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

  LOOKING FOR PRICING?
Find a Rep

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top