Skip to Content
Kenall Manufacturing - Homepage
Main Content


SimpleSeal Architectural for Cleanroom & Containment

CSEA4I24 Main Image
CSEA4I24 Main ImageFastener DetailIP64 HingeHermetically Sealed Housing
Model #: CSEA4I24
  • Ceiling mount – recessed grid, recessed flange or surface; 2'×2' & 2'×4'
  • Two independently-circuited lamping functions
  • Ingress Barrier Door provides consistent surface for cleanability
Biosafety and Containment
Containment Areas
Research and Development
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeHeavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables Ordering Information below. Phillips head stainless steel fasteners secure door to housing – eight (8) with (1×4, 2×2), ten (10) with (2×4). Extruded closed cell gasket seals doorframe to housing.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347V, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 330µA maximum source current. Inner and Outer lamping compartments can be independently powered and dimmed.
Housing20-gauge CRS (18-gauge with Surface Mounting). Hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners (Grid and Flange Mounting). White TGIC polyester powder coat with 5-stage pre-treatment. Salt spray test 1,000 hours. Reflectance 92%. See Ordering Options for Antimicrobial Finish.
InstallationSurface Mount: Four .312" diameter holes. Grid Mount: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). Flange Mount: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Locations and non-IC recessed installations.  ETL certified IP65 per IEC 60598. NSF2 Splash Zone. CCEA approved for grid or flange mount. Suitable for FED-STD-209E/Class 100 (ISO 5) Cleanrooms. 
OpticsInterior lamping compartment contains a central linear frosted acrylic diffuser paired with dual outer frost acrylic diffusers. Clear impact-resistant acrylic external lens; sealed to door frame with vinyl gasketing.
WarrantyLimited five (5) year warranty on LED lamps.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


Product Documentation

Photometry (IES)