Skip to Content
Kenall Manufacturing - Homepage
Main Content

CMEXR

SimpleSeal

CMEXR Main Image
CMEXR Main Image
Model #: CMEXR
Features:
  • Recessed wall mount – Single Face
  • Indirect Red or Green LED
  • Self diagnostic testing features
  • One-piece seam welded housing
  • 304 stainless steel overlapping doorframe
Application(s):Packaging and Staging
Biosafety and Containment
Isolation Areas
Corridors
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Exit
Lamp Type(s):LED
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication) standard – see ordering information. One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with 4 captive flush mounted Phillips head stainless steel fasteners.
Doorframe GasketOne-piece closed cell extruded silicone gasket seals doorframe to housing and wall structure.
Electrical624 nm Red or 527 nm Green LED light source. Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Exit Ready – can power one Kenall METSS Satellite Exit.
Housing20-gauge CRS standard – see ordering information. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5 step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LegendLegend illuminated by internal high output LEDs. Lettering six inches high with .750" stroke. Polycarbonate red or green filter panels. High impact, punched, formed and painted sheet metal stencil and field selectable chevron inserts.
Lens.125" clear polycarbonate lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash and Non-Food Zone. Meets or exceeds UL924 and NFPA 101 standards. Meets or exceeds CSA and NRCAN requirements. FED-STD-209E/Class 100 (ISO 5) Cleanrooms.
OptionsSealed nickel-cadmium Emergency Battery Pack (EL) with standard deep cycle battery conditioning, self test and self diagnostic circuitry, remote laser activated test switch, protected mechanical test switch and status indicator. Provides 120 minutes of emergency operation. Emergency Battery Pack (EL) suitable for 10°C to 45°C (50°F to 113°F). Cold Weather Emergency Battery Pack (CEL) suitable for -45°C to 45°C (-49°F to 113°F). (When used with a Kenall METSS, this fixture provides 90 minutes of emergency operation.)
PatentU.S. Patent No. 5, 902, 035.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top