Skip to Content
Kenall Manufacturing - Homepage
Main Content


EnviroSeal for Transportation

TES5 Main Image
TES5 Main ImageTES Continuous Row MountTES Hinge
Model #: TES5
  • Surface ceiling or wall mount – 5"×24", 5"×36", and 5"×48"
  • Hinged door for ease of maintenance
  • LED compatible with SmartSense™ Control System for energy savings
Application(s):Parking Garage
Transportation Platforms
Underpass and Tunnel
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateContinuous seam welded 18-gauge type 304 stainless steel construction. Mounts flush to ceiling or wall surface. Each end cap provided with .875" dia. punched, flattened knockout.
ElectricalFluorescent – Electronic ballast <10% THD standard. See Ordering Information for multiple ballasts and optional equipment. Lamps by others. Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA.
FastenersTorx® Head stainless steel fasteners standard. See Options for stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners.
FinishBrushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.
HingeContinuous 1" open leaf stainless steel hinge secured to door and housing.
HousingOne-piece seam welded 16-gauge type 304 stainless steel construction.
InstallationFor housing without wiring and mounting holes, see Field Drilled Installation Holes Option (FDIH). Four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.
Lens RetentionLens positioned in channels and retained with stainless steel fastener(s).
Lens/GasketUV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket seals lens housing to baseplate.
ListingsUL and CUL listed for Wet Location – covered ceiling or horizontal wall mount. UL certified IP65 per IEC 60598.
SocketsShock-resistant fluorescent sockets with internal locking collar to ensure positive lamp retention.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


Product Documentation

Installation Files

Photometry (IES)