Skip to Content
Kenall Manufacturing - Homepage
Main Content



SH12 Main Image
SH12 Main Image
Model #: SH12
  • Surface mount – wall or ceiling; 12"×36", 12"×48"
  • ADA Compliant
  • 16-gauge cold rolled steel baseplate with seam welded end caps
  • P12 polycarbonate wraparound lens
  • Peace of Mind Guarantee® against breakage
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Dorm Rooms
Schools and Universities
Sally Ports
Gymnasiums and Multipurpose Rooms
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateOne-piece, 16-gauge CRS baseplate and seam welded end caps. Baseplate provided with six-point mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for alternative materials and finishes. Lens positioned in baseplate channels and retained with stainless steel Torx® fasteners. Baseplate/end caps mount flush to ceiling or wall surface.
ElectricalLED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC AND 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 330µA max. source current. Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims down to 30%. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
HardwareStainless steel Torx® fasteners secure lens in baseplate channel.
InstallationSix-point mounting required for Peace of Mind Guarantee®.
LensCold formed .156" P12 polycarbonate lens. See Options for alternate lenses.
ListingsUL and CUL listed for Wet Location – covered ceilings only. UL and CUL listed for Damp Locations – wall mount. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. 
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.


Product Documentation

Installation Files

Photometry (IES)

Additional Resources