Skip to Content
Kenall Manufacturing - Homepage
Main Content

S1414L

Sentinall for Institutional High Abuse

S1414L Main Image
S1414L Main Image
Model #: S1414L
Features:
  • Surface ceiling mount – 14"W×14"W×3"D
  • 18-gauge cold rolled steel baseplate
  • UV-stabilized, injection molded polycarbonate lens
  • Stainless steel Torx® fasteners
Application(s):Locker Rooms
Multifamily Housing
Restrooms
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Lens Type(s):Pearlescent
Lamp Type(s):LED
Size(s):14"×14"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate18-gauge CRS. Baseplate provided with four-point mounting holes, one wireway hole and junction box mounting keyholes – see Cross Section/Details. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options or Accessories for marine grade aluminum baseplate (AL) and aluminum surface conduit adapter (ASA).
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketDie-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HardwareTwo stainless steel Torx® with center pin fasteners secure lens/housing to baseplate.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
Lens/HousingOne-piece wraparound lens/housing. UV-stabilized, high impact, virgin injection molded polycarbonate. Housing section available in Matte White or Dark Bronze finish.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. 
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com.
ReflectorFull reflector/wire cover – white finished aluminum (92% reflectivity).
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top