Skip to Content
Kenall Manufacturing - Homepage
Main Content

MedMaster Pillow

MPCK-TW_HS01.png
MPCK-TW_HS01.png
Model #: MPCK-TW
Features:
  • Sealed 2'×2' or 2'×4' troffer for recessed grid and drywall ceilings
  • Ambient, examination and reading multi-function lamping for over-bed applications 
  • Full backlit LED array with 2700K-5000K white tuning capability on all functions
  • Concave thermoformed diffuser for an aesthetically differentiated appearance
  • Standard IP64 and NSF2 rating with door construction providing unique room side access via quick-release pins
  • Optional night light and low-voltage controller (LVC)
Application(s):Patient Rooms
Size(s):2'x2'
2'x4'
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsOptional LVCD provides a low-voltage patient interface, controlling the lamp source and optional night light with dimming control. CCT control with analog (0-10V) control types, whether with or without the LVCD, is a separate control line that must be connected to a device supporting 0-10V adjustment. See chart on Page 2 for further details.
Door AssemblyOne-piece fabricated 18ga CRS doorframe with TGIC polyester powder-coat finish in selected color, with five-stage pre-treatment.  Curved-sided aperture.  Doorframe secured to housing with internal torsion springs.  Room side access to internal components via four (4) color-matched, self-retracting hand pull pins located in corners of doorframe.  Closed-cell silicone gasketing seals doorframe to housing.  Continuous outer lens retention with doorframe.
Driver120-277VAC, 50/60Hz electrical input (PF ≥ 0.9, THD < 20%). Minimum 85% electrical efficiency. Ambient, Reading and Exam functions are separately circuited, except when ordered with the low-voltage controller option (LCVD). Full output mode is achieved by powering all lamping circuits simultaneously. Serviceable, constant current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI (Type 8) driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details.
HousingSealed, precision-formed 24ga cold rolled steel. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationSuitable for recessed ceiling installation into 9/16" and 15/16" lay-in grid ceilings. Gasketed wire access panel on rear of housing allows electrical connections without door removal; includes one 7/8" hole and one 7/8" knockout.. See Accessories for adapter kit for drywall ceiling installation. Suitable for -20°C to 40°C ambient environments, unless otherwise noted.
LED ModuleServiceable multi-channel back-lit array with tunable-white, mid-power LEDs.  2700K through 5000K CCT adjustment range with a two-point path. Minimum 90 CRI standard (R9 >50).Optional nightlight in 590nm native amber or 2700K, 80CRI white.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for recessed ceiling insulation contact (IC-rated) and Indoor Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance.Build America, Buy America Act compliant.
OpticsVacuum-formed, impact-resistant and high-efficiency diffused acrylic lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year LED warranty.

This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top