MedMaster Flair
| Model #: | MFS |
|---|---|
| Features: |
|
| Application(s): | Parking Garage Kitchen and Food Prep Locker Rooms Multifamily Housing Cafeterias Restrooms Nursing Stations Patient Rooms Foyers and Lobbies Corridors Exteriors and Entryways |
| Lamp Type(s): | LED |
| Listings: |
Technical Specifications
| Controls | Optional embedded microwave motion sensor mounted behind center diffuser. Factory default is 30% dimming and 20min. timeout. Custom settings available upon request. Sensor operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage. Retains CCT control in tunable white (TW) instances. |
|---|---|
| Electrical | Fixed White & Amber: 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high-power factor electronic, constant-current driver (<20% THD, >0.90 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA source current per luminaire. Optional DALI-2 DT6 driver with 1-100% dimming range without dim-to-dark capabilities. Tunable White: 120-277VAC, 50/60Hz electrical input with serviceable, constant current multi-channel programmable driver with dual analog (0-10V) control inputs for intensity and CCT. Optional DALI-2 DT8 driver. Logarithmic intensity profile with 0.1-100% range, with dim-to-dark capabilities. Linear profile on CCT adjustment. Refer to charts on page 2 for further details. |
| Housing | Die-cast aluminum baseplate and frontal heat sink trim. Optional die-cast aluminum surface-mount adapter for use with conduit. Standard TGIC polyester powder coat finish on aluminum components with five-step pre-treatment to withstand 1,000-hour salt spray test per ASTM B117. See Ordering Information for available finishes. Closed cell gasketing seals all housing component interfaces. |
| Installation | Suitable for surface wall or ceiling installations over recessed junction box. 0°C to 40°C ambient environments, unless otherwise noted. Anchored four-point mounting required. Trim assembly secured to baseplate with three (3) face-mounted, color-matched, Philips fasteners. |
| Lamping | Available 3000K, 3500K and 4000K static white color temperatures with 3-step MacAdam variation allowance, or native 590 nm amber. Optional tunable white LED array provides 2700K through 6500K CCT range with a two-point path. Minimum 80 CRI standard (R9 >0) with optional minimum 90 CRI (R9 >50). 360° edge-lit center lamping and perimeter lamping are constructed with the same color specification LED and operate on the same driver. See dual-function MFD product for independent color and control configurations. |
| Listings |
Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location Wall and Covered Ceiling; listing includes Emergency Battery Pack “LEL” option. IP64 rating per IEC 60598. NSF2 Splash/Non-Food Zone rated. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08.
|
| Optical | Injection-molded UV-stabilized polycarbonate outer lenses for center and perimeter light engines. Textured clear perimeter light guide for unique illuminated effect but near transparent non-illuminated appearance. Center light engine utilizes inner acrylic light guide to provide uniformity from edge-lit light source, in conjunction with diffused polycarbonate outer lens. |
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com. |
| Warranty | Limited five (5) year LED warranty. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.