SimpleSeal



| Model #: | HASESI |
|---|---|
| Features: |
|
| Application(s): | Locker Rooms Cafeterias Restrooms Stairwells Storage Facilities Corridors Sally Ports Exteriors and Entryways Natatoriums |
| Lens Type(s): | .187" Prismatic Polycarbonate Specified Lens Symmetric, Diffused DR Acrylic inside lens .250" Clear Polycarbonate outside lens |
| Lamp Type(s): | LED |
| Size(s): | 1'x4' 2'x2' 2'x4' |
| Listings: |
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.
Technical Specifications
| Doorframe | 18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners. |
|---|---|
| Electrical | Available 3500K, 4000K and 5000K color temperatures. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 660 µA maximum source current. |
| Housing | 18-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
| Installation | Adjustable swing-out mounting brackets standard. See options for pendant mounting holes. Standard with side feed hole, see options for Top Wiring Access (TWA). |
| Lens | See Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®. |
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratory for Wet Location installations. ETL certified IP65 per IEC60598. CCEA approved. HASESI is participating in Declare. |
| Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com |
| Warranty | Limited five (5) year LED warranty. |
This product may be able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.
