| Ballast | Quantity and type as specified – see ordering information. All ballasts UL listed class P. Standard removable gear tray with quick disconnect. |
|---|
| Door | One-piece die-formed prime grade material as specified – see ordering information. |
|---|
| Fasteners | Hardened security screws as specified – see ordering information. Fully recessed. |
|---|
| Finish | TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Hinge | Full length staked and welded internal piano hinge (1/2" knuckle/1/8" diameter pin) standard. |
|---|
| Housing | One-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG). |
|---|
| Lamps | Quantity and type as specified – see ordering information. Lamps supplied by others. |
|---|
| Lens | As specified – maximum total thickness .500" – see ordering information. Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot be provided. |
|---|
| Lens Retention | Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). |
|---|
| Listings | UL and CUL listed for damp locations. See ordering information for wet location applications. |
|---|
| Photometrics | For photometric information, go to www.kenall.com.
|
|---|