| Driver |
Luminaire input 24VDC from remote-located 120-277VAC, high-power-factor power supply with EMI filter. Dimming line EMI filter required if utilizing dimming function. Internal non-switch mode DC-DC driver. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. See below for ordering information.
|
|---|
| Housing | Die-formed 0.025" aluminum construction with non-ferrous hardware. Low-gloss white TGIC powder coat finish with five-stage pre-treatment. |
|---|
| Installation |
Suitable for Type-IC recessed ceiling installation into 9/16”, 15/16” and slot-T lay-in grid ceilings. All power and signal wiring must be in completely grounded aluminum conduit. Light engine and internal driver are replaceable post-installation. MRI room EMI filters required (see Accessories below). Suitable for 0°C to 25°C ambient temperature environments.
|
|---|
| Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location and recessed type IC installations. NSF2 Splash/Non-Food Zone. |
|---|
| Optics | Snap-in, one-piece extruded frost DR acrylic diffuser. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. |
|---|
| Warranty | Limited five (5) year warranty. |
|---|