|Doorframe|| 0.050" aluminum. One-piece inset-style construction with welded corners. Gloss white TGIC polyester powder coat finish with 5-stage pre-treatment. Doorframe secured to housing with aircraft cables and captive, flush-mounted Phillips-head fasteners. Non-ferrous hardware. Antimicrobial finish standard on all exposed painted surfaces of the installed luminaire. Closed-cell silicone gasket seals doorframe to housing.|
|Driver/Controls||Luminaire input 24VDC from remote-located 120-277VAC, high-power-factor power supply with EMI filter. White and green circuits must be powered from independent remote power supplies and dimmers. Dimming line EMI filter required if utilizing dimming function. Internal non-switch mode DC-DC driver. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. See below for ordering information and power supply/filter accessories.|
|Housing||Hole-free, one-piece, seam-welded aluminum construction. 0.050" aluminum housing flange with mitered and welded corners. Non-ferrous components and hardware. Gloss white TGIC polyester powder-coat finish with 5-stage pre-treatment. Antimicrobial finish on all exposed painted surfaces of installed luminaire.|
Surface mounting via four (4) 0.312" (0.79cm) holes. Singular side wiring feed hole provided. All power and signal wiring must be in completely grounded aluminum conduit. Light engine and internal driver are replaceable post-installation. MRI room EMI filters required (see Accessories below). Suitable for 0°C to 25°C ambient temperature environments.
|LED Module||Serviceable mid-power LED array, specified as either all-green or green and white (see 'Green/White LED Layouts' diagram on page 3). 530nm green mid-power LED array. White LED circuit with minimum 80CRI standard, 90CRI optional. See Ordering Information for available color temperature options. |
Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. IP65 rating per IEC 60598. NSF2 Splash/Non-Food Zone. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Compliant with MIL-STD 461G for radiated and conducted emissions.
|Optics||High-efficiency diffused, impact-resistant acrylic lens. Symmetric/asymmetric and full asymmetric optic adds internal Total Internal Reflection optics to work in conjunction with diffused lens providing asymmetry while maintaining uniform appearance.|
|Photometrics||Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.|
|Warranty||Limited five (5) year LED warranty|