Skip to Content
Kenall Manufacturing - Homepage
Main Content

MR13ESR

Millenium Rounds

MR13ESR Main Image
MR13ESR Main Image
Model #: MR13ESR
Features:
  • Surface mount – ceiling or wall; 14"Dia. ×3"D
  • Peace of Mind Guarantee® against breakage
  • Dust and water protected to IP64 standards
  • ADA compliant
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Natatoriums
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):13"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketingClosed cell, silicone “O” ring gaskets positioned in gasket channels of lens base and in Series PP, ND housing.
HardwareOne stainless steel Torx® with center pin fastener.
Housing(SERIES PP, ND): Die-cast aluminum housing with integral heat sinks. Housing interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard bronze exterior TGIC polyester powder coat – 5-step pre-treatment. (SERIES NL): 18-gauge CRS housing. Housing interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Standard white exterior TGIC polyester powder coat – 5-step pre-treatment.
InstallationSee Technical Data Sheets for semi-recessed installation details, mounting accessories and rough-in box availability.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
Lens Base/GrilleLens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom Color (see Ordering Information below) are chemically bonded, impact resistant finishes.
ListingsUL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. 
PatentU.S. Patent No. 6,042,251.
ReflectorCompact Fluorescent: Full reflector/wire cover – 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top