Electrical | Serviceable composite-bodied mid-power LED arrays. See Ordering Information for available CCT selections. Minimum 80 CRI standard (R9>20) with optional minimum 95 CRI (R9>70). 120-277VAC, 50/60Hz electrical input. Serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Standard 0-10V dimming with 0-100% range. 200μA max. source current per function. EMC meets or exceeds FCC CFR Part 15, Class A. Optional LVCD control provides low-voltage patient interface, controlling the ambient and exam modes independently with dimming control. |
---|
Housing | 20-gauge CRS with hole-free, one-piece, seam-welded construction. 18-gauge housing flange with mitered and welded corners. Gloss white TGIC polyester powder-coat finish with 5-stage pre-treatment. |
---|
Installation | Non-IC recessed ceiling mounting into grid and flange application types. Flange installation utilizes included adjustable swing-out mounting brackets. Grid installation suitable for 1" and 1.5" T-bar ceilings. Universal installation into grid or flange (drywall) ceiling applications. |
---|
Listings | Listed to UL1598 and UL8750 by Intertek Testing Laboratory (ETL) for Wet Locations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone. Photometry tested to IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. CCEA compliant. |
---|
Reflector/Lens Assembly | Die-cast and extrueded aluminum construction with one-piece, seamless appearance and tool free service access. Low-gloss white TGIC polyester powder coat finish with 5-stage pre-treatment. Frosted impact-resistant PMMA diffusers. Assembly secured to housing with internal torsion springs. |
---|
Warranty | One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
---|