| Controls | Integral occupancy sensor utilizes 5.8GHz High-Frequency Doppler (HFD) technology for enhanced coverage area and reduced temperature sensitivity in stairwells compared to passive infrared (PIR). Completely enclosed sensor maintains Wet Location listing and IP65 rated. EMC compliant to FCC CFR Part 15. Adjustable settings for coverage sensitivity, time-out period (10s-30min) and standby dimming level (50%-10% output). Occupancy sensor can be optionally deleted for use with centralized, 0-10V dimming based control systems such as Kenall SmartSense™. |
|---|
| Electrical | Replaceable mid-power LED array. See Ordering Information for color temperature and CRI options. 120-277VAC, 50/60Hz input with replaceable high power factor electronic constant-current dimming driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. EMC compliant to FCC CFR Part 15. Standard 20KV/KA surge protection to IEEE/ANSI C62.41 Cat. A. |
|---|
| Housing | Marine-grade die-cast aluminum and injection-molded polycarbonate construction. Integral aluminum heatsink with concealed air inlet and convection fins. TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell neoprene self-adhesive gasket seals housing to mounting surface. Closed cell silicone gasket seals diffuser to housing. |
|---|
| Installation | Surface-mount to ceiling or wall. Four point mounting required for Peace of Mind Guarantee™. -20°C to 25°C ambient temperature rated unless otherwise noted. |
|---|
| Lens | UV-stabilized, high-impact resistant, injection molded clear textured 100% DR acrylic or polycarbonate diffuser. ≥97% efficiency on internal reflector. Lens secured with four Torx® fasteners. |
|---|
| Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08 (TP Lens type required). |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. |
|---|
| Warranty | Limited ten (10) year warranty details |
|---|