Skip to Content
Kenall Manufacturing - Homepage
Main Content

MO13ED

Millenium Ovals for Architectural High Abuse

MO13ED Main Image
MO13ED Main Image
Model #: MO13ED
Features:
  • Surface mount – wall or ceiling; 9"W×13"H×6"D
  • Aluminum baseplate with UV-stabilized high impact lens
  • Peace of Mind Guarantee® against breakage
  • ADA Compliant
  • Tested to IESNA LM-79-08 standards
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Schools and Universities
Foyers and Lobbies
Exteriors and Entryways
Natatoriums
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):13"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketingDie-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens base and housing.
HardwareTwo stainless steel Torx® with center pin fasteners.
HousingMarine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting capabilities. Standard black, bronze or white exterior TGIC polyester powder coat – 5-step pre-treatment. See Ordering Information for optional finishes.
InstallationFor wall mount installation, mount lamp base up on all HID lamp sources.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. High efficiency blondel fluted lens obscures lamp image and maximizes uniformity. Close tolerance mating of injection molded lens and lens base facilitates set up and installation. Lens and lens base secured with two concealed captive Torx® with center pin fasteners.
Lens Base/GrilleLens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate. Optional Light Gray, Silver, Forest Green or Custom Color (see Ordering Information below) are chemically bonded, impact resistant finishes.
ListingsUL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598.
PatentU.S. Patent No. 6,042,251.
ReflectorCompact Fluorescent: Full reflector/wire cover – 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top