Driver | 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.4mA maximum source current. |
---|
End Caps | Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only). |
---|
Hardware | Four stainless steel, tamper-resistant Torx® T-20 with center pin fasteners secure lens in housing body's lens channel. |
---|
Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). Contact factory for custom lengths. |
---|
Installation | Surface ceiling, vertical or horizontal wall, corner mount (CMB) or suspended pendant mounting (PM). Six-point mounting per unit section recommended. Suitable for -30˚C to 40˚C ambient environments, unless otherwise noted. |
---|
LED Module | Serviceable mid-power LED array. Minimum 80 CRI standard (R9>0), consult factory for optional 90CRI (R9>50). Maximum three-step MacAdam ellipse variation. See Ordering Information for available color temperature options. |
---|
Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location – covered ceiling mount. See Options for Wet Location – covered ceiling mount. Corner, horizontal wall and pendant mount installation – Damp Location only. ADA compliant. Suitable for use as a raceway. Suitable for use in continuous row. |
---|
Optics | UV-Stabilized, high-efficiency diffused polycarbonate with smooth exterior and linear prismatic interior. Lens securely positioned in body channels and endcaps, locked into place with concealed tamper-resistant Torx ® T-20 with center pin fasteners. |
---|
Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
---|
Warranty | Limited ten (10) year LED warranty. |
---|