•  

MLRS8

Millenium Stretch

MLRS8-QS Main Image
MLRS8-QS Main Image
Model #: MLRS8
Features:
  • Surface mount – wall or ceiling; 8"×24", 8"×48", 8"×96"
  • Individual luminaires
  • ADA compliant
Application(s):Parking Garage
Parks and Recreation
Locker Rooms
Multifamily Housing
Walkways
Stairwells
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent High Impact 100% DR Acrylic
Clear High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):8"W
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.
End CapsMarine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).
HardwareStainless steel, tamper-resistant Torx fasteners secure lens in housing body's lens channel (two on 24", four on 48" housings; eight on 96" housings).
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes.
InstallationStandard four-point (24" housing), six-point (48" housing) and twelve-point (96" housing) mounting recommended.
LensUV-stabilized, high impact extruded clear or pearlescent acrylic. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsUL and CUL listed for Damp Location. See Options for Wet Location – covered ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant.
Lumen DataMLRS8 Lumen Data
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited ten (10) year warranty for LED Lamps.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top