| Electrical | Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277 VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. Consult factory for flourescent option. |
|---|
| Hardware | Four stainless steel, tamper-resistant Torx fasteners secure lens in housing body's lens channel. Electrical Quick Connector supplied (Specify Circuit Qty, see below). Torx screwdriver ordered separately. |
|---|
| Housing | Marine grade aluminum. Extruded body with flat or rounded die-cast end caps. TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for finishes. Each pattern run of luminaires consists of one or more “L”, “N”, “T”, or “X” node. See ordering information to specify quantities. NOTE: Contact factory for pattern layout details. |
|---|
| Installation | Standard six-point mounting per fixture recommended. |
|---|
| Lens | UV-stabilized, high impact extruded clear or pearlescent acrylic. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets. |
|---|
| Listings | UL and CUL listed for Damp Location only. Suitable for use as a raceway. Consult factory. Suitable for use in continuous row. ADA compliant. |
|---|
| Nodes | Marine grade cast aluminum cover mounted to 18-gauge mounting plate. Cover includes knockouts for Wiremold™ entry (not available in "X" 4-way node). |
|---|
| Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
|---|
| Reflector | Full reflector/wire cover – 92% reflectivity. |
|---|
| Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
|---|
| Warranty | Limited ten (10) year warranty for LED Lamps. |
|---|