| Controls | Optional sensor available with compatible third party controls. To see the full list of compatible controls, click here. |
|---|
| Driver | 120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); maximum 165 µA maximum source current. Optional eldoLED ECOdrive DALI drivers with 1-100% range. |
|---|
| Housing | Extruded marine grade aluminum body with die-cast aluminum end caps. Two end cap styles available for ends of run - Flat and Round. Conduit and Wiremold™ ready knockout visible only from interior of end cap. Closed cell EPDM and silicone gasketing along lens channel and end caps. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Inner Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). |
|---|
| Installation | Surface ceiling, vertical or horizontal wall, corner mount (CMB) or suspended pendant mounting (PM). Standard four-point mounting (2-point for 2-foot & 3-foot fixtures) per fixture required for Peace of Mind Guarantee®. Suitable for -30˚C to 40˚C ambient environments, unless otherwise noted. |
|---|
| LED Module | Serviceable mid-power LED array. Light output specified in lumens per foot for consistent light output across luminaires in various length configurations. Minimum 80 CRI standard (R9>0), optional 90CRI (R9>50). Maximum three-step MacAdam ellipse variation. See Ordering Information for available color temperature options. |
|---|
| Lens | UV-Stabilized, high-efficiency diffused polycarbonate or high-performance, impact-modified diffused acrylic material options. Lens securely positioned in body channels and endcaps, locked into place with concealed, tamper-resistant Torx® T-20 with center pin fasteners. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location - Covered Ceiling installations. IP64 rating per IEC60598 – ceiling mount. Corner, horizontal wall, vertical wall and pendant mount installation – Damp Location only. ADA compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. |
|---|
| Warranty | Limited ten (10) year LED warranty. Peace of Mind Guarantee against breakage. |
|---|